Toy Soldier TACTICAL CHEST HARNESS MK.2 SET已经到货

kkk · 发表于 2004-6-8 12:25

Center Split Six Internal M4 Magazine Pouches Creates More Pouch Attachment Space

The center split was installed for rapid access by medics without ditching all the gear which causes a secondary load for extraction. The split was designed with a velcro overlap to keep the maximum number of PALS slots in play. Attachment is achieved by three snaps and two inch velcro anchored at the top by a one inch side lock buckle and at the bottom by a low profile velcro snap tab forming a secure closure.

The front face of the rig is covered with PALS webbing which accepts military issue pouches. The back is mesh covered forming a map pocket. Internal slots hold six GI M4/M16 magazines secured by a pistol holster type thumb break for quick extraction. Thumb break has two snaps to accept clear magazines and magazines with Mag Pul or other extraction devices. Shoulder straps are of wide two inch webbing for wear over body armor or alone, and affix with three large two inch side-lock buckles for quick extraction. Removable bib is sold seperately.

- 1000 Denier DuPont Cordura Plus fabric, double layered.
- 138 weight bonded nylon parachute harness thread.
- Strength rated nylon webbing and tapes
- American name brand plastic and metal fasteners (Duraflex, ITW Nexus, ACW, etc.).
- VelcroTM and Rip and GripTM mil spec hook and loop fastener.
- Closed cell foam.
- Heavy weight woven elastic.
- Edges bound by double stitched nylon Type 3 seam tape.
- Stress points anchored by double stitching, bar tacks, and