Hot Toys 1/6《钢铁侠3》装甲格纳库 (DS001A-C)

Jack-Bauer

Hot Toys 1/6《钢铁侠3》装甲格纳库 (DS001A-C)
以1:6比例模式还原托尼.斯塔克的装甲库 打造属于您的装甲格纳库

知名珍藏人偶品牌Hot Toys于2010年开创人偶界先河，取得漫威影业授权制作《钢铁侠》电影系列的高端珍藏人偶，与钢铁侠电影建立了紧密的联系，同时Hot Toys凭借设计及制作团队一贯高度细致的巧手工艺和对制作高度像真珍藏人偶的热诚，已先后推出了逾70个钢铁侠珍藏人偶，一直深得钢铁侠狂迷的喜爱！ Hot Toys为答谢粉丝们的长期支持，现再度重启《钢铁侠3》1:6比例装甲格纳库珍藏品，让铁粉们能以1:6比例模式，高度还原《钢铁侠3》电影中Tony Stark工作室内的装甲库情景，强势列阵各式各样的Hot Toys铁钢铁侠珍藏人偶，打造属于您的装甲格纳库！

Hot Toys除了创制高度还原电影角色的1:6比例珍藏人偶外，还致力研发各种不同的珍藏人偶系列，是次透过一贯极高度像真的巧手工艺重启让铁粉们期待以久的《钢铁侠3》装甲格纳库，以1:6比例精心制作出逾高38cm、长23cm、深17.5cm，分别备有单个、4套装和7套装供顾客预订。每个装甲格纳库均准确地按照着《钢铁侠3》电影内托尼.斯塔克的装甲格纳库细致打造，完美刻划装甲库内部的精密结构，每个装甲库均内置17组白色LED 和3组蓝色LED发光灯效(AC/DC电源) 分布在内部及外部两侧，并附送钢铁侠Mark I 至Mark VII 的仿Hologram 贴纸，可贴于装甲库上的透明胶片，呈现出高科技感！此外，各组装甲格纳库均可以互相连接，让铁粉们于家中陈列出各款Hot Toys钢铁侠珍藏人偶，轻松还原《钢铁侠3》电影中托尼.斯塔克在地库内设置的装甲格纳库！

《钢铁侠3》装甲格纳库1:6比例珍藏品产品特点：
精心细致制作，充分表现出装甲格纳库於《钢铁侠3》电影中的造型
约38cm高, 23cm 长, 17.5cm深
像真度高的金属色系涂装
内置17组白色LED 和3组蓝色 LED发光灯效 (需电池启动）
适用於陈列各款Hot Toys钢铁侠珍藏人偶
透明胶片连钢铁侠Mark I 至Mark VII 的仿Hologram 贴纸
各组装甲格纳库均可以互相连接
配备AC/DC电源装置设计

单装版本 (DS001A)： 包括一块透明胶片连七款钢铁侠Mark I 至Mark VII 的仿Hologram 贴纸 (共7张贴纸)
四套装版本 (DS001B)： 包括四块透明胶片连两套钢铁侠Mark I 至Mark VII 的仿Hologram 贴纸 (共14张贴纸)
七套装版本 (DS001C)： 包括七块透明胶片连三套钢铁侠3Mark I 至Mark VII 的仿Hologram 贴纸 (共21张贴纸)

推出日期: 约2019年第3季至第4季

**图片所示只是产品原型，与最後完成产品或许会有少许分别
**产品不包括珍藏人偶
**不包括电池，每个珍藏品需要3A及2A电池
**不包括AC/DC电源转换器
**产品细节如有任何更改，恕不另行通知

TM & © 2018 Marvel & Subs.
© 2018 Marvel.
© 2018 Hot Toys Limited. All Rights Reserved.

---------------------------------------------------
单装版本 (DS001A)： 包括一块透明胶片连七款钢铁侠Mark I 至Mark VII 的仿Hologram 贴纸 (共7张贴纸)










---------------------------------------------------
四套装版本 (DS001B)： 包括四块透明胶片连两套钢铁侠Mark I 至Mark VII 的仿Hologram 贴纸 (共14张贴纸)






---------------------------------------------------
七套装版本 (DS001C)： 包括七块透明胶片连三套钢铁侠3Mark I 至Mark VII 的仿Hologram 贴纸 (共21张贴纸)






---------------------------------------------------


Beautifully designed to combine functionality and modern engineering, the Hall of Armor from Tony Stark’s Malibu mansion displays the evolution of Iron Man armor has left unforgettable impression on fans. Located in the basement workshop, it was created to place the futuristic arsenal of armored suits with perfect protection. Today, Hot Toys is excited to reissue the stylish 1/6th scale Hall of Armor Collectible from the Diorama Series inspired by the movie Iron Man 3!

Complement the contemporary architecture of the enormous mansion, the movie-accurate collectible stands approximately 38cm tall, 23cm wide and 17.5cm deep features more than 20 different LED light-up areas and remarkable metallic painting, stickers that shows holographic-like effect of Mark I-VII, and most importantly it is compatible with displaying Hot Toys 1/6th scale Iron Man Collectible Figurine Series!

Recreate Tony Stark’s lab with the Hall of Armor sets, it’s going to get your collections a polished exterior while keeping them safe and secure!

Hot Toys – DS001A-C - Iron Man 3- 1/6th scale Hall of Armor Collectible
~ Diorama Series ~

-              Masterfully crafted with authentic and highly detailed Hall of Armor in Iron Man 3
-              Approximately 38cm H x 23cm W x 17.5cm D
-              Specially applied fine metallic painting
-              17 white LED light-up points and 3 blue LED light-up points throughout parts of the collectible (battery operated)
-              Suitable for all Hot Toys 1/6th scale Iron Man Collectible Figurine Series
-              Transparent acrylic plate with stickers with holographic-like effect
-              Each Hall of Armor can be combined with another to create the diorama setting
-              AC/ DC compatible
DS001A - Each Hall of Armor includes 1 transparent acrylic plate and 7 types of stickers with holographic-like effect of Mark I-VII (total 7 stickers)
DS001B - Set of 4 includes 4 transparent acrylic plates and 2 sets of stickers with holographic-like effect of Mark I-VII (total 14 stickers)
DS001C - Set of 7 includes 7 transparent acrylic plates and 3 sets of stickers with holographic-like effect of Mark I –VII (total 21 stickers)

Release date:     Approximately Q3 –Q4, 2019

**Prototype shown, final product may be slightly different
**Figures are not included and are sold separately
**Battery is not included for Hall of Armor, 3A batteries and 2A batteries are required for each set of one
** AC/ DC adaptor is not included
**Product details could be subjected to change without further notice

TM & © 2018 Marvel & Subs.
© 2018 Marvel.
© 2018 Hot Toys Limited. All Rights Reserved.

llq

整体不错

吉良吉影.鸦

感谢分享